
Roll-EZ Double Ball Bearing
NEW FLAT RATE SHIPPING ON WHEELS!!
Once you use our ball bearing wheels
you will never settle for standard ones again!!


Redesigned to now have a higher quality sealed ball bearing on each solid
metal wheel and on stainless steel axles!
Better plating, better bearings, and most important to you
BETTER QUANTITY PRICING!!!
Nickel plated double ball bearing
wheels---------------------------------------------$12.95 per pair
Black Oxide double ball bearing
wheels----------------------------------------------$12.95 per pair
10 pairs-20 axles-will do 5
cars--------------------------------------------------------------$12.50 per pair
20 pairs-40 axles-will do 10
cars------------------------------------------------------------$11.95 per pair
50 pairs or
more------------------------------------------------------------------------------------$10.95
per pair
Over 100 pairs
--------------------------------------------------------------------------------------$10.50
per pair
These new Roll E-Z double ball bearing wheels are made from solid brass and
stainless steel. They cannot rust and cannot get your tracks dirty!
With this tremendous breakthrough in pricing and the double ball bearing,
the non ball bearing metal wheel is virtually a thing of the past!
The advantages are clear:
-
You eliminate the drag!
-
You pull more train cars!
-
Your loco motors & gears last longer!
-
No more worn out rails on curves!
-
Less power required for loco!
The finest G-Scale wheels made. These
wheels are the same size as the plastic wheels on most G-Scale trains.
These fit all USA Trains, all Bachmann standard length cars, all Aristo-Craft,
all LGB, all Hartland, all Delton and all Buddy L. Some slight axle end hole
opening may be required on certain LGB or Aristo products. It is quick and
easily accomplished and well worth the effort.
For those who prefer the realism of a black metal wheel but want the
protection and realism of a shiny tire and flange, look at the silver pair
we colored the centers of with a magic marker. This leaves the tire and
flange a realistic silver color. Easy to do, permanent, and very realistic.

You cannot possibly "Re-Invent the
Wheel"
but you certainly can improve on it
and we have done just that.
----------------ALL PRICES PLUS
SHIPPING-----------
Standard
Wheels
BETTER QUANTITY PRICING!!!
19 pairs or less-------------------$7.95 per
pair
20 pairs------------------------------$7.50 per pair
50 pairs------------------------------$7.25 per pair
100 or more pairs--------------$6.50 per pair
The
"Conductor" stainless steel track locking device.



A San-Val exclusive!! We designed
this great item 15 years ago and have sold over 500,000 of them worldwide!
Now at a new lower price!! Reduced from $1.89 each
to $1.49 each.
Buy a bag of 50 at only $1.29 each
Buy a bag of 100 at only $1.10 each!!
These are the strongest and tightest clamping rail locks on the market! 100%
stainless steel. They cannot bend or gaul like the cheap brass ones do! They
cannot rust or corrode! They are the easiest to install because they install
from the top! These fit LGB, Aristocraft, USA Trains, and Bachmann track in
any form--steel, brass, aluminum or stainless!!! They install OVER the rail
joiner to insure perfect alignment. You can use them as power wire attach
points also!
These locks act like 4 super strong vises on each rail joiner that when
tightened virtually make the entire railroad a single strand of brass with
little or no voltage drop over a 1000 foot mainline. Totally reusable and
virtually indestructible!!
If you want to play with your railroad instead of working on
it due to poor conducting this is your only GOOD solution!! These eliminate
the need for feeder wires on large layouts!!!
|
Roll-EZ Exclusive
THE BIG BRITE-BLOK TRACK CLEANER
Our
standard Brite-Blok track cleaner has been the best working, best selling
track cleaner that we have had available for the last 20 years! Many of our
customers requested that we design a similar one that will fit something
other than Aristo-Craft and Bachmann two-axle cars.
We have
designed a whole new wider, longer, heavier Big Brite-Blok that will fit on
USA Trains Standard Series boxcars and reefers, Ultimate Series 40 and 50
foot boxcars, Ultimate 50 foot reefers and Aristo-Craft Standard boxcars and
54 foot Evans boxcars. Since very few model train operators now used
anything less than 8 foot diameter curves, we have designed this to work on
8 foot or larger curve track without it falling through the rails.
Installation is simple: you drill two small holes between the centerbeam of
the car floor where they will never be seen, place the guides in the holes
and slip on the retaining tubing to secure it. All done! You can use Big
Brite-Blok continuously or just run it a few laps to polish the railheads on
your entire layout like never before. Replacement pads (only needed after
months of daily use) are simply glued in place with A.C.C. (super glue).
We have
personally tested the Big Brite-Blok unit for six continuous weeks on our
outdoor railroad and have had 100% total success. You will, too!
Big Brite-Blok
Only $28.95 Ready to Go |
 |
Roll-EZ Exclusive
"Briteblok"The Absolute BEST device ever invented for track cleaning.
Weighted block easily installs to underbody of any 2 axle BACHMANN Caboose
or any 2 axle ARISTOCRAFT Gondola or Bobber Caboose. Once mounted on car
simply drag around with your engine. It works while you play ! Comes
complete with 3 extra replacement Scotch-Brite pads plus one already
installed. Pads are held on with any type of CA or "Super" Glue. This can
be yours for only $23.95!
|
 |
NEW FOR 2008!! USA TRAINS SD-70 MAC PAINT SCHEMES!!
ORDER YOURS NOW FOR ONLY$299.95



R22615 BNSF(speed lettering) Orange/Green(this one only $277.95)
R22616 Union Pacific- Missouri Pacific Heritage-Two Tone Blue
R22617 Union Pacific- Western Pacific Heritage-Black/Gray
R22618 Union Pacific- Katy Heritage-Red/Maroon
R22619 Union Pacific- D&RGW Heritage-Yellow/Black/Silver
R22620 Union Pacific- Chicago & North Western Heritage-Green/Yellow
R22621 Union Pacific- Southern Pacific Heritage-Black/Orange/Yellow
DUE
SOON!!
DOCKSIDE 0-6-0T STEAM LOCOMOTIVE

We will beat any advertised price and ship free by UPS ground
with a $50.00 non-refundable deposit at posted price!!!
SPECIAL FEATURES
-
1:29 Scale:
-
Accurately detailed
die-cast metal construction
-
Operating headlight
& cab light and directional backup light
-
Illuminated marker
lights
-
Operating Smoke
Stack
-
Fully Synchronized
Sound System Included
-
Die-Cast Drivers &
Stainless Steel Rims
-
Highly detailed
metal Piping
-
Metal Drive Rods
-
Metal Hand Rails
-
Brass Bell & Whistle
-
Detailed Builders
Plate
-
Simulated Coal Load
R20050 Undecorated
R20051 D&RGW (1)
R20052 Santa Fe (101)
R20053 Union Pacific (68)
R20054 Southern Pacific (2)
R20055 New York Central (8)
R20056 Pennsylvania (9)
R20057 Reading (3)
R20058 Baltimore & Ohio(38)
R20059 Boston & Maine (9)
R20060 Colorado & Southern (7)
R20061 Virginia & Truckee (7)
R20062 Colorado Mining Co. (1)
R20063 Bethlehem Steel (71)
R20064 US Army (1)
R20065 Canadian Pacific (4)
R20066 Canadian National (53)
R20067 Christmas (206)
R20068 Maine Central (5)
R20069 Great Northern (9)
R20070 New Haven (30)
Your choice $457.95 each
Free Domestic Ground Shipping with
$50.00 non-refundable deposit!!